ILD14 HANDBOOK
Box Contents
1 x ILD14 Amplifier
1 x Earth crimp terminal
1 x Spiral mains cable wrap
1 x 2 hole sealing insert
1 x 4 hole sealing insert
1 x T200mAL fuse for 115V ONLY
Handbook Contents
!
!
Overview
!
Quick Start
!
Installation
!
Troubleshooting
!
Technical Specification
!
Warranty
!
Declaration Of Conformity
!
Accessories
Safety
This symbol is used to alert the user to important
operating or maintenance instructions.
The Lightning bolt triangle is used to alert the user
to the risk of electric shock.
SAFETY
1. It is important to read these instructions, and to follow them.
2. Keep this instruction manual in an accessible place.
3. Do not install this equipment near any heat sources such as radiators, heating
vents or other apparatus that produces heat.
4.
WARNING THIS APPARATUS MUST BE EARTHED.
(AC Version only )
5.
The ILD14 is designed to be permanently connected apparatus and must
be installed with all applicable installation regulations. A readily accessible
disconnect device shall be incorporated in the building installation power
wiring.
6. Mount the ILD14 with the wiring entering from the bottom of the unit if possible.
Failure of, or incorrect seating of any of the cable glands, may allow liquid or
moisture to enter the unit.
7. Refer all servicing and installation to qualified personnel.
8. The amplifier generates some heat during normal operation and needs
adequate ventilation. It should not be fitted in a fully enclosed space.
9.
Ensure the mains power cable is properly secured and insulated by using
the spiral wrap supplied. Ensure earth is connected to chassis
(AC Version only) see installation.
10. Fit the correct sealing insert in each gland according to the type of wire used, 2
wire, 4 wire or round section. Where all three inputs are used and the Status
output, you will need to use a multicore type cable consisting of multiple twisted
pairs having a round outer profile.