Ampetronic ILD100DC Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 12

Ampetronic ILD100DC Скачать руководство пользователя страница 1

1. It is important to read these instructions, and to follow them.
2. Keep this instruction manual in an accessible place.
3. Clean only with a dry cloth. Cleaning fluids may affect the equipment.
4. Do not cover or obstruct ventilation of this unit. Install in accordance with the

manufacturer’s instructions.

5. Do not install near any heat sources such as radiators, heating vents, or other

apparatus that produces heat.

6. Refer all servicing to qualified personnel. Servicing is required when the

apparatus has been damaged in any way, such as a power supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to any rain or moisture, does not
operate normally or has been dropped.

7. WARNING - To reduce risk of fire or electric shock, do not expose this

apparatus to rain or moisture. The apparatus shall not be exposed to dripping
or splashing and no objects filled with liquids, such as vases, shall be placed
on the apparatus.

ILD100DC HANDBOOK

Box Contents

1 x ILD100DC
1 x Installation & Commissioning

Handbook

1 x Power Cable
1 x Designing Induction Loops Handbook
1 x AC to 12V Power Adapter

DC

1 x A6 Induction Loop Logo
1 x DC PSU Handbook
1 x Drilling Template

Handbook Contents

!
!

Introduction

!

Quick Start

!

Overview

!

Installation

!

Troubleshooting

!

Accessories

!

Technical Specification

!

Warranty

!

Declaration of Conformity

Safety

The Lightning bolt triangle is used to alert the user
to the risk of electric shock.

SAFETY:

This symbol is used to alert the user to important
operating or maintenance instructions.

1
2
3
...
»

Содержание ILD100DC













Отзывы:

Нет отзывов