ISUPS2B004 Rev 1
Page 7 of 70
Ampcontrol Pty Ltd
– ABN 28 000 915 542
ISUPS 300Wh V2 USER MANUAL
ISUPS2B004 R2
– DEC/17
2
RECEIVING AND STORAGE
2.1 Receiving
All possible precautions are taken to protect the equipment against damage or losses during shipment,
however, before accepting delivery, check all items against the packing list or bill of loading. If there are
shortages or evidence of physical damage, notify Ampcontrol immediately.
Notify Ampcontrol immediately in the case of any discrepancies to the packing list. Keep a record of any
claims and correspondence. Photographs are recommended.
Where practicable do not remove protective covers prior to installation unless there are indications of
damage. Boxes opened for inspection and inventory should be carefully repacked to ensure protection
of the contents or else the parts should be packaged and stored in a safe place. Examine all packing
boxes, wrappings and covers for items attached to them, retain and store any approval documentation
for your safety file as applicable prior to wrapping being discarded.
2.2 Inspection
Equipment that is found to be damaged or has been modified away from its published specification must
not be used. Please contact Ampcontrol if the equipment is suspected to be different than that ordered or
if it does not match the published specifications.
2.3 Storage after Delivery
2.3.1 General Storage Requirements
When the equipment is not to be installed immediately, proper storage is important to ensure protection
of equipment and validity of warranty.
All equipment should be stored indoors, in a cool dry environment, on raised shelves, and protected from
the elements. Ensure that the storage area is not an area where water will collect.
2.3.2 ISUPS Battery Care
The storage period should be as short as possible. Temperature has an impact on the self-discharge
rate hence it is important to store the batteries in a fully charged condition in a cool but frost-free room.
The batteries will be delivered fully charged and installed inside the enclosure. The battery is non-
serviceable and non-user replaceable.
WARNING!
DO NOT ATTEMPT TO REMOVE THE BATTERIES FROM THE
ENCLOSURE
The ISUPS has
no internal user-serviceable parts
. All repairs must
be carried out by Ampcontrol personnel only. If a fault develops return
the ISUPS to Ampcontrol for repair. It is essential that no attempt be
made to repair the UPS as any attempt to dismantle or repair the UPS
can seriously compromise the safety and correct operation of the unit
.
