Ampcontrol Pty Ltd
– ABN 28 000 915 542
GASGUARD CH4 GAS SENSOR USER MANUAL
GSB076 Version 6
– March/2019
Uncontrolled Copy - Refer to Ampcontrol Website for Latest Version
Page 6 of 25
A
P
P
R
OV
E
D
FOR
E
X
T
E
R
N
A
L
D
IS
TR
IB
U
T
ION
–
P
R
OP
E
R
T
Y
OF
A
M
P
C
ON
TR
OL
P
T
Y
LTD
–
N
O
T
T
O
B
E
R
E
P
R
OD
U
C
E
D
I
N
P
A
R
T
1
SAFETY AND OTHER WARNINGS
For safety reasons, the Gasguard CH4 Sensor must be installed, operated and serviced only by
competent personnel. Please read and understand this instruction manual completely before installing,
operating or servicing this equipment. Failure to install or operate this instrument in accordance with the
instructions contained in this manual may create hazardous operating conditions.
WARNING!
The sensors should not be stored in areas that contain solvent vapours.
Some of these vapours are known to create false "high" zero points and
may even damage the sensor electrodes. Similarly, the sensor should
not be exposed to high levels of solvent vapours while in operation.
WARNING!
This equipment has been designed to detect explosive gases and
vapours and to give warning before they reach dangerous conditions.
1.1 Safe Use of Equipment
The equipment supplied has been designed and manufactured to ensure safe operation. The equipment
must only be used within the design parameters.
The instructions within this manual must be observed as an aid towards achieving the safest possible
installation.
Persons responsible for installation, maintenance, or operation, must observe the following
instructions:
1.1.1 Changes to Equipment
Changes in the design and modifications to the equipment are not permitted. Unauthorised changes
made to the hardware or operating firmware will void the manufacturer's warranty, and may
compromise the integrity of the system into which it is installed and other connected equipment.
1.1.2 Equipment Knowledge
Experience with, or understanding of, this equipment is essential for the safe installation and removal of
the equipment. Therefore, please read and understand this manual prior to use. Competency based
training courses are recommended and are available on request.
1.1.3 Manual Handling
Precautions have been taken to ensure all equipment is safe to handle and free from sharp edges.
However care should always be taken when handling enclosures and gloves should be worn.
1.1.4 Installation
Correct operation and safety depend on the Gasguard CH4 Sensor and associated equipment being
installed correctly. Mechanical and or electrical installation and maintenance of plant and equipment
must only be carried out by appropriately qualified personnel and must be tested thoroughly prior to
operation.
1.1.5 Operation
As safety depends on the Gasguard CH4 Sensor functioning correctly it is highly recommended that all
safety functions of the unit be periodically tested to ensure correct operation.
