For Technical Support, Contact AMP
at (775) 345-9933 (9 am - 5 pm PST)
Connect amplifier RF output SMA connector to antenna
Connect the RF output from the CNT1 video transmitter to
RF input SMA connector.
STEP
STEP
STEP
Note
When setting up your system, the transmit and receive
antennas should be greater than 25 feet apart to
prevent serious damage to or destruction of the
receiver’s front end
HSN1 Power Amplifier Quick Start Guide
Connect power, Communications (if required), and
enable inputs to the MDM-9P connector *see reverse side
All manuals and user guides at all-guides.com
all-guides.com
