For Technical Support, Contact AMP
at (775) 345-9933 (9 am - 5 pm PST)
Advanced Microwave Products
PO Box 1437
2465 Old Highway 40 West, Suite 200
Verdi, NV 89439
Connect antennas to SMA connectors
Connect video monitor/recorder to BNC connector
Connect audio outputs to 3.5mm stereo jack and/or
the MDM-9S connector (if applicable)
Set Configuration *see reverse side
STEP
STEP
STEP
STEP
STEP
STEP
Connect power/communications inputs to the
MDM-9P connector *see reverse side
Check RSSI meters to confirm a signal is being received
Note
When setting up your system, the transmit and receive
antennas should be greater than 25 feet apart to
prevent serious damage to or destruction of the
receiver’s front end
EDR1 Receiver Quick Start Guide
