INSTALLATION & MAINTENANCE GUIDE
–6–
w w w. a m p l i g h t i n g . c o m
–6–
[email protected] • 813.978.3900
–7–
AMP
®
PinnaclePro Mini Path Light
APL-3017-4-X-XX
Install Lens
6
Adjust Luminaire Direction
7
Adjust Angle of Fixture Body
8
Clear away an area in the ground at
the wireway slot on top of the stake.
Lay the luminaire pigtail into the
wireway slot and attach the fixture
onto the stake.
Fixture
Stake
Pigtail
Wireway Slot
Strip both leads from the luminaire pigtail. Using two wire connectors
(sold separately), connect the leads from the luminaire to the main
supply cable leads.
Pigtail
Main Supply Cable
Wire Connectors
Using an Allen Wrench, loosen the
adjustment screws and modify
the fixture body to the desired
angle. Then tighten the
adjustment screws.
Allen Wrench
Adjustment Screw
Install/Replace Bulb
Loosen the set screw on glare guard, remove the glare guard and the
shield to expose the bulb. Replace it with the correct wattage and type
marked on the fixture label. Then reinstall the shield and glare guard and
tighten with the set screw.
IMPORTANT: Halogen bulb must be protected from moisture and dust at all
times. Always reinstall the shield and glare guard when removed.
