[email protected] • 813.978.3900
Product Dimensions
–4–
INSTALLATION & MAINTENANCE GUIDE
–5–
w w w. a m p l i g h t i n g . c o m
–5–
Package Contents
Parts Required (Sold Separately)
A. (1) Fixture
B. (1) Stake
A. (1) AMP
®
ONE Design-Master
Remote Control
TM
2”
4”
Install Stake
1
Board
Stake
Soil
Ground
Install Fixture to Stake
2
Fixture
Stake
Pigtail
Determine desired location for mounting
the fixture. Hammer stake into ground until
flange of stake is flush to grade. To avoid
damage to stake, place a board on top of
the stake while hammering.
NOTE: If ground is hard and the stake
is difficult to install, make a crosscut
in ground using a flat shovel before
hammering the stake.
Clear away area in ground for the
stake. Lay the luminaire pigtail into the
cleared area and screw the fixture into
the stake. Tighten until snug.
AMP ONE
®
HydraPro™ LED In-Grade Light (Dimmable)
AWL-700IR-25-BBZ
