AMP Lighting HydraPro AWL-5006-B-BZ, Инструкция по установке и обслуживанию

Страница: 7 / 8

–6– –6–
customersupport@amplighting.com • 813.978.3900
–7–
Install/Replace Glare Guard
7
Remove Faceplate
Use a screwdriver to loosen the
screws on the faceplate and
remove the lens from the fixture
body.
Faceplate
Lens
Screw
Fixture Body
8
Replace Faceplate
Place the lens and faceplate onto
the fixture body and secure with
previously removed screws in a
star pattern. Hand tighten until
snug with a screwdriver.
Faceplate
Lens
Screw
Fixture Body
Option 1 Option 2
Faceplate Replacement Options
Option 3 Option 4
Install/Replace Lamp
Repeat step 1 - step 3 to remove the faceplate and expose the lamp.
Replace it with the correct wattage and type marked on the fixture label.
Then, reinstall the faceplate.
IMPORTANT: Lamps must be protected from moisture and dust at all
times. Always reinstall the faceplate when removed.