AST 560 Semi-automatic Cryostat Microtome
201911119
---10---
4.2 Timing Set
Click the timing icon on the upper left corner of the main screen; it pops up a sub-interface
as shown below fig 10.
Fig 10
1 Left arrow
Use cooperatively with right arrow 3, select one date and set its working time
for each function. As fig10 , it shows each function’s working time on
Wednesday
2 Selected date
The selected date; Within setting of the function in this date, press the arrow
to select the next date to continue setting
3 Right arrow
Use cooperatively with left arrow 1 , select one date and set its working time
for each function
4 Automatic
defrosting time
Set the selected date and set the automatic defrosting time; Please note to
save the sample and remove the waste before defrosting
5 Automatic start
time
Set the selected date and set the automatic start time
6 Automatic
disinfection time
Set the selected date and set UV disinfection time. Please note it disinfects
only when the heating window closed
7Sleep time
Set the automatic sleep time
8Back
Press the key to return to the main interface after setting the parameters
4.3 Auxiliary Function
9
4
5
1
6
7
8
2
3
