AST 560 Semi-automatic Cryostat Microtome
201911119
---8---
4
、
Operation
4.1
Operation Panel Function & Control
All the parameters are set and displayed via Touch Panel. After power on, use the control
panel to operate the instrument as follows
:
4.1.1 Touch Panel Main Interface
The touch panel main interface is as followed:
Fig 8
1
．
Timing Set
Click the icon, pop-up sub-interface, set timing parameters for each
function
2
．
Auxiliary Function
Click the icon ,pop up sub-interface , select the auxiliary function
3
．
Lamp
Click the icon ,turn on/off the lamp
4
．
Time display and set
Display current date and time .Click the icon ,set the date and time
5
．
Cryo chamber
temperature set and display
Display the actual cryo chamber temperature ; Click the icon , pop
up sub-interface , set the cryo chamber temperature
6
．
Freeze shelf temperature Display the freeze shelf temperature
7
．
Specimen clamp
temperature
Display specimen clamp temperature ; Click the icon , pop up
sub-interface, set its temperature
8
．
Environment temperature Display the environment temperature
12
1
2
4
3
5
6
7
8
9
10
11
13
14
15
16
17
