Ammann AV 70 X, Руководство по эксплуатации

Страница: 28 / 162

22 AV 70 X
2.1. Major Safety Precautions
2.1.1.3 Ensurance of safety measures by the
owner
User shall provide for the Machine to be operated merely •
under those conditions and only for those purposes it is
technically capable for under conditions set by manufactu-
rer and respective standards.
He must make sure the use of the Roller (Compacter) is used
•
merely in such a way and at such workplaces where there is
no hazard of making damage within nearby facilities, etc.
He shall provide for regular inspection of operation, tech-
•
nical condition, regular machine maintenance in cycles per
the Lubrication and Maintenance Manual. In cases of failing
technical condition of the Machine to such an extent it po-
ses hazard to safety of operation, persons, property or cau-
ses damage or impairs the environment, then the Machine
must be put out of operation until a defect is repaired.
He must specify who and what tasks may carry out under
•
operation, maintenance or repair of the Machine.
Any who drives the Machine (driver) and anybody who per-
•
forms Machine maintenance or repairs must get familiar with
the guidelines given in the Machine Operation Manual.
He shall provide for fire extinguisher to undergo regular in-
•
spections.
He must ensure the “Machine Operation Manual” and Ope-
•
ration Logbook are stowed at certain place inside seat box
so always available to the driver.
He shall furnish constant supervision by an appointed per-
•
son during Machine operation under traffic on public roads,
and he will in particular be liable to release instructions on
securing the work safety.
He must secure the removal of hazardous materials (fuel, oil,
•
cooling liquid, brake fluid, etc.) from where these are spilled
depending on their nature so as to avoid their adverse im-
pact against environment, operation safety and persons’
health.
2.1.1.4. ROPS Cab
The ROPS cab must not be deformed and must not show •
signs of corrosion, cracks or breaks. It must be fixedly con-
nected to the machine frame. No additional adjustments
of the cab may be performed without approval of the ma-
nufacturer as such adjustments can cause a reduction in its
strength. The screwed connections must comply with the
specification and must be tightened to the specified torque,
must be neither damaged nor deformed, and must not
show signs of corrosion.