manualshive.com logo in svg

Ammann ASC 70, Руководство по эксплуатации

Поделиться
Скачать
Ammann ASC 70 Скачать руководство пользователя страница 114

110

ASC 70

396210

396211A

396212A

3.6.  Lubrication and Maintenance

3.6.4.  Crankcase breather tube

•  Check ventilation of the crankcase whether it is not contam-

inated with deposits, or, during winter season, frozen with 

ice.

Note
When operating the Machine at the temperatures below 0 °C 

(32 °F), please check at shorter intervals.

3.6.5.  Fan and engine belt condition check

•  Check visually the fan. If you find for instance any missing 

parts of the material, cracks, shape changes, etc. - replace 

the fan.

•  Check visually the belt. Small cracks are not a defect. If any 

smooth, bright flats (faces, small surfaces) occur on the belt, 

or belt’s edges are frayed (shattered), or parts of the material 

are torn away, then it will be necessary to make the adjust-

ment of its replacement.

Cog belt 

Order number: 4-9501000306

Содержание ASC 70

























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды