Ammann ASC 200 Series, Руководство по эксплуатации

Страница: 181 / 198

181 ASC200/ASC250
MAINTENANCE MANUAL
1
2
Maintenance - As Needed Maintenance - As Needed
3.6.36. Cleaning the machine
•
Clean the machine from major impurities after finis-
hing your work.
•
Perform overall cleaning regularly at least once in a
week. When working in cohesive soils, cement and
lime stabilisation’s, the overall cleaning must be
performed daily.
! NOTE !
Blind all openings into which the clean-
ing agent might penetrate (e.g. engine
inlet opening) prior to pressure water
washing. Remove these blinders after
washing the machine.
Do not expose electric parts or insulation
material to direct water or steam flow.
Always cover such materials (inside of
the alternator etc.).
Disconnect batteries using the isolating
master switch.
Work with stopped engine.
Do not use aggressive and highly inflam-
mable cleaning agents (e.g. petrol or
highly inflammable materials).
3.6.35. Cleaning the air cleaner of cabin
ventilation
•
Dismantle the cover grill 1.
•
Carefully beat out the element and wash it in a deter-
gent solution. If you damage the cleaning element or
you are not able to clean it properly, replace it with a
new one.
! NOTE !
Clean it once in a month. In case you
work in very dusty conditions, make the
interval shorter.
•
Take out the cleaner with cleaning element 2.
Follow environmental standards and
regulations when cleaning the ma-
chine!
Clean the machine in a site equipped
with an intercepting system for
cleaning agents so that the soil and
water sources are not contaminated!
Do not use forbidden cleaning
agents!