Ammann ASC 200 Series, Руководство по эксплуатации

Страница: 159 / 198

159 ASC200/ASC250
MAINTENANCE MANUAL
Every 500 Hours or Once in 6 Month Every 500 Hours or Once in 6 Month
•
Tighten 3/4 to 1 turn after gasket makes contact with
the filter head.
•
Check the drain plug sealing replace it, if damaged.
•
Check the engine sump thread and clean the contact
area of the sealing.
•
Mount the plug back. Tightening torque is 60 Nm (44
ft-lb).
•
Fill the engine through the filler.
•
Refill oil to the upper oil level mark (H). Oil charge is
19.7 l (20.8 qt) inclusive of fill oil filter.
NOTE
•
After refilling, start the engine for 2 - 3 min. Check
tightness of drain plug and filter.
•
Stop the engine, wait for approx. 5 min. until oil runs
down to the engine sump. Then check the level with oil
dipstick.
! NOTE !
Do not tighten the filter too tight, the
thread and sealing might get damaged.
Beware of scalding when drain-
ing hot oil. Let oil cool down to
less than 50 °C (122 °F).
Follow the fire safety measures!
Collect drained oil; do not let it soak
into the ground.
Used oil and filters are environmen-
tally dangerous waste - have them
liquidated.
! NOTE !
Exchange oil after 6 months at the latest,
if 500 hours of operation have not been
reached by that time. Exchange oil in
the interval that comes first.
Use recommended filters - see the speci-
fications manual or Spare parts cata-
logue. Use recommended oil - see chap-
ter 3.2.1.