Ammann ASC 200 Series, Руководство по эксплуатации

Страница: 120 / 198

120 ASC110/ASC130/ASC150/ASC200/ASC250
2.9. Using the machine under special conditions
1
2
2.9.5. Installing air conditioner
When retrofitting air condition unit, it is necessary to keep
sufficient distance between the oil cooler and air condi-
tioner condenser in order that air flow the machine cool-
ing system is not affected. (This would reduce cooling
capacity of radiators.) Minimum distance is 50 mm (2 in).
Draining:
•
Secure the drum by scotch blocks from both sides, lift
the rear part of the roller and release brake of wheel
hydromotors, see chapter 2.9.1.
•
Rotate tyres so that valves 1 are at top positions.
Unscrew valves. Warning! The solution will squirt out
at unscrewing. Unscrew caps 2.
•
Screw the filler into the opening see gr. 635 Parts
katalogue.
•
Rotate tyres so that fillers are at bottom positions.
•
Apply a hose with pressured air to inflation valve and
inflate until the solution stops draining.
•
After draining tyres, unscrew fillers and screw in valves
and caps again.
•
Inflate tyres to the prescribed pressure.
•
Activate brakes - see chapter 2.9.1.
! NOTE !
Use safety goggles (safety shield) and
rubber gloves.