Ammann ARR 1575 Yanmar Скачать руководство пользователя страница 125

Страница: 125 / 146

119

ARR 1575

555085

555039

555037

555038

MAINTENANCE MANUAL

• Lightly oil the sealing ring on the filter lid.
• Put the filter lid in place.
• Tighten the lid with a torque wrench (max. torque, 20 Nm).

Every 1000 hours of operation (1 year)

3.6.18. Exchanging hydraulic oil and filter

First carry out after 500 hours.

Replacing the hydraulic oil filter

• Remove the filter lid.
• Unlock the filter element.
• Lift the filter element out of the filter housing.
• Dispose of the filter element in an ecologically appropriate

manner.

• Place the new filter element in the proper position. Observe

the position of the locking cam.

• Turn the filter element fully clockwise to the stop.

Set of hydraulic oil filters

Order number: 1182946

Draining the hydraulic oil
Note:
Only drain the hydraulic oil at operating temperature.
Residues in the tank will be flushed out with the oil.

• Place a container (with at least a 30 liter capacity) under the

hydraulic oil drain.

• Remove the hydraulic oil tank lid (1).

Содержание ARR 1575 Yanmar



















































































































































Результаты поиска

Содержание ARR 1575 Yanmar

Отзывы:

Похожие инструкции для ARR 1575 Yanmar

Бренды по названию

Популярные бренды

Ammann ARR 1575 Yanmar, Руководство по эксплуатации

Результаты поиска

Содержание ARR 1575 Yanmar

Отзывы:

Похожие инструкции для ARR 1575 Yanmar

Бренды по названию

Популярные бренды