Ammann ARR 1575 Yanmar Скачать руководство пользователя страница 120

Страница: 120 / 146

114

ARR 1575

555031

3.6. Individual Operations of Maintenance

• Refill engine oil through one of two filling ports.

- Oil filling port on the left engine side (1)
- Oil filling port on the engine (2)

• Keep the level within the range of gauge marks pressed in

the dipstick. The lower mark shows the lowest possible oil

level, the upper mark the highest possible oil level.

Note:
The total amount of oil in the engine is 3.4 l (0.9 US gal).

Beware of scalding when draining hot oil. Let oil cool

down to less than 50 °C (122 °F).
Follow the fire safety measures!

Use recommended filters - see Spare parts catalogue.

Use recommended oil - see chapter 3.2.1.

Collect drained oil; do not let it soak into the ground.
Used oil and filters are environmentally dangerous waste

- have them liquidated.

Содержание ARR 1575 Yanmar



















































































































































Результаты поиска

Содержание ARR 1575 Yanmar

Отзывы:

Похожие инструкции для ARR 1575 Yanmar

Бренды по названию

Популярные бренды

Ammann ARR 1575 Yanmar, Руководство по эксплуатации

Результаты поиска

Содержание ARR 1575 Yanmar

Отзывы:

Похожие инструкции для ARR 1575 Yanmar

Бренды по названию

Популярные бренды