Ammann AP 240, Руководство по эксплуатации, Страница: 78 / 170

72 AP 240
0
I
II
I
II
III
IV
0
P
0
START START
START
3236
3236
3397
0
I
2
374023
1
2.7. Machine Control and Usage
2.7.4. How to stop the Machine and the engine
Before braking to a stop, shift the controller (2) to neutral, •
and when stopped, switch ON the parking brake, shut OFF
the engine and pull out the key (1).
Note:
With the key pulled out from ignition box the Roller will auto-
matically be braked.
With the engine running the parking
brake switch must be ON with the roller
at standstill!
Do NOT shut off the engine immediately,
instead let it run for 3 ÷ 5 minutes at idle
thrust at 850 rpm for turbocharger to
cool down.
When work is completed, always discon-
nect the battery via battery disconnec-
tor! Observe time limit of 30 sec. before
disconnecting the battery following ig-
nition box switched OFF so to maintain
Machine operation data in ECM of the
engine.
NEVEr park your roller on a slope with
gradient of over 15 %!