Ammann 5953002, Руководство по эксплуатации

Страница: 94 / 194

88 ARX 36-2 T4i, ARX 40-2 T4i , ARX 45-2 T4i
EG001
1 2
EG003A
21
9
2.7 Machine operation and use
2.7.12 Edge cutter (optional equipment)
The edge cutter set contains a cutting and compaction disc.
The cutting disc (1) is used to cut the road at the desired location
and align the road edges.
The compaction disc (2) is used to finish the compaction of road
edges.
Note
If one of the discs is not in use, attach it to the holder provided.
Edge cutter pre-adjustment
• Before working with the edge cutter, set the vibrating drum
selector (9) to the left (front drum).
•
Set the vibration amplitude switch (21) to center (low
frequency - low amplitude) or to the far left (high frequency
- low amplitude)
It is forbidden to switch the vibration amplitude while
driving
Note
The edge cutter only works flawlessly with a pre-adjusted edge
cutter.