Ammann 5953002, Руководство по эксплуатации

Страница: 106 / 194

100 ARX 36-2 T4i, ARX 40-2 T4i , ARX 45-2 T4i
2.9 Special conditions to use the machine
2.9.7 Machine operation in dusty environment
While operating in a very dusty environment, shorten
cleaning and replacement intervals of air filter cartridg-
es and shorten cleaning intervals of coolers.
The recommended cleaning interval is once a week.
2.9.8 Driving with vibration on compacted
and hard materials
When the machine works with vibration on hard materials (e.g.
loose stony materials) or materials with a high degree of com-
paction, the drum can lose its contact with the compacted ma-
terial (so-called vibro stroke). Due to this condition, the transfer
of vibrations to the machine frame and to the operator’s stand
increases. It can be partly removed by increasing the travel
speed or by changing the vibration parameters of the machine
(using a smaller amplitude).
If it is necessary to work with the machine in conditions when
the operator can be exposed to higher vibrations, the machine
user must modify working procedures to protect the driver's
health.
Note
When driving with vibration on a different background material
than specified in the Specification manual, the emission values
of the vibration acceleration will be different – Noise and vibra-
tion emissions.