Ammann 5932003 Скачать руководство пользователя страница 128

Страница: 128 / 174

124

ARX 23-2 T4i, ARX 26-2 T4i

588301A

593041

396247

3.6 Lubrication and maintenance operations

3.6.21 Engine oil change

Carry out for the first time after 50 hours
Drain the oil after the operation is finished immediately

after the coolant has been cold down to 60 °C (140 °F), or

warm up the engine during operation until the coolant

temperature reaches 60 °C (140 °F).

The engine oil drain plug is on the left side in front between the

front and rear frame of the machine.
Turn the machine to the right to get better access to the drain

plug.
The total volume of oil in the engine is 7 litres (1.85 US gal).
Remove the drain plug and let the oil drain out.
Remount the plug.

Clean the surface around the head of the oil filter. Remove the

filter. Clean the seating surface for the filter gasket.

Lubricate the gasket with oil.
Mount the new filter.

Do not overtighten the filters to prevent damage to the

thread and gasket.

Engine oil filter

Order number: 1504183

Содержание 5932003















































































































































































Результаты поиска

Содержание 5932003

Отзывы:

Ammann 5932003, Руководство по эксплуатации, Страница: 128 / 174

Результаты поиска

Содержание 5932003

Отзывы: