©Copyright AMKUS Rescue Systems 2020-2021
15
LAP-012 October 7, 2021 Rev02
8.0 INITIAL START-UP
1. Connect the hose reel hoses together
before starting the system.
2. Using a hex-key wrench, remove
4 corner screws to remove the VFD cover.
3. The VFD is shipped with the circuit breakers
in the OFF position.
Place the VFD circuit breakers in the ON position
by flipping each switch up.
4. The upper section of the Control Panel houses the
touch screen display and the touch display.
The green button is used to enable/disable the
entire unit. Press the physical or digital green
button to start the system. The screen should
indicate the system has started.
ON
5. Press the physical or digital blue M1 button to start
Motor No. 1.
The screen should indicate Motor No.1 is running.
ON
6. Press the physical or digital red M2 button to start
Motor No. 2.
The screen should indicate Motor No. 2 is running.