4010 ATD LT ASSY/OPER/PARTS MANUAL (74303) 12/08
TO THE OWNER
The 4010 AIR TILL DRILL has as standard equip-
ment a clearance lighting package . If your unit
is not equipped with this package, it can be
ordered by contacting your local dealer or the
factory directly.
It is the responsibility of the user to read the
Operator's Manual and comply with the safe and
correct operating procedures as pertains to the
operation, lubrication and maintenance of the
product according to the information outlined
in the Operator's Manual.
If this machine is used by an employee or
is loaned or rented, make certain that the
operator(s), prior to operating, is instructed in
safe and proper use and reviews and under-
stands the Operator's Manual.
The user is responsible for inspecting his/
her machine and for having parts repaired or
replaced when continued use of this product
would cause damage or excessive wear to the
other parts. The word NOTE is used to convey in-
formation that is out of context with the manual
text; special information such as specifi cations,
techniques, reference information of supple-
mentary nature.
When in need of parts, always specify the model
and serial number. Write this number in the
space provided.
It is company policy to improve its products
whenever possible and practical to do so. We re-
serve the right to make changes, improvements
and modifi cations at any time without incurring
obligation to make such changes, improve-
ments on any equipment sold previously
All equipment is equipped with a serial num-
ber tag to track the unit. The serial number
tag is located on the inside of the outer frame
tube in the front left corner of the main frame
(SEE BELOW). Use the information on this tag
to identify when ordering parts or requesting
information
MODIFICATIONS
5
