RRAS-MCT/A
15/19
rras-mcta_g_en_100
9. Configuration settings
All IP phone set configuration is performed via Ethernet interface.
9.1. Factory settings
The IP
ho e set s tted th „R STOR “ butto to et to a tory sett . The
button should be pressed while switching the phone set supply voltage on.
Successful factory restoring is indicated by short blinking of backlighted buttons
on panel front side.
The „RESTOR “ butto s a ess b e throu h sma ho e o housing rear side.
Factory setting
Fig. 11 - Location of factory setting button