Amino AmiNET500, Руководство по установке, Страница: 2 / 32

ii
Pr
eface
Thank you for choosing the
Amino AmiNET500 Personal
Video Recorder (PVR)
Please follow the instructions in this installation
guide carefully in order to quickly and safely start
enjoying the benefits of digital TV. We advise
carefully reading all of the enclosed safety and
installation instructions before using the
AmiNET500. Please keep this installation guide
close to your AmiNET500 for future reference.
Your service provider will give you a separate User
Guide that will explain how to access the services
and features that are available through your digital
TV service.
Product safety
Warnings, Cautions and Notes
Throughout this manual, please pay special
attention to the following indications of potentially
hazardous situations:
Warning!
I ndicates a hazardous situation,
which, if not avoided, could result in
serious injury.
Caution!
Indicates a situation, which, if not
avoided, could damage the product
or other devices.
Note!
Indicates additional information to
the user to make the user aware of
possible problems and to help the
user understand, use and maintain
the product.
Warnings, Cautions and Notes are included in the
product literature to ensure your safety and the
correct operation of the product – please adhere to
them.
Attachments
Use only the supplied accessories and attachments
with your AmiNET500. Use of accessories or
attachments that are not supplied or approved by
the manufacturer may be unsafe, may be
detrimental to the life or performance of the
AmiNET500 and will immediately invalidate any
product warranty.
Water and moisture
To reduce the risk of fire or electric shock, this
product, its accessories and attachments must not
be exposed to any liquids, rain or moisture. The
product must not be exposed to dripping,
splashing or high humidity. Do not use this product
in any location where it may become in contact
with any liquid or vapor.
Product care
Servicing
This product contains no user-serviceable parts.
The product must not be dismantled. Attempts to
dismantle the product may be unsafe, may be
detrimental to the life or performance of the
product and will immediately invalidate any product
warranty.
Servicing must only be attempted by suitably
qualified service personnel.
The AmiNET500 has tamper-evident seals.
Breaking or modifying these seals in any manner
will immediately invalidate the product warranty.
Cleaning
The product, accessories and attachments should
only require occasional wipe with a dry cloth.
Unplug the mains plug from the wall outlet before
cleaning the product.
The silver aluminum case of the AmiNET500 may
be cleaned with a slightly damp cloth to remove
stubborn marks.
Do not spray any substance or use any polishes,
thinners, abrasive cleaning products, liquids or
aerosol products to clean the product, its
accessories or attachments.
Unpacking and installing the
product
Once removed from the transit packaging, the
AmiNET500 must be handled with care and must
not be dropped, shaken or exposed to any physical
shock.
The AmiNET500 is designed to be mounted
horizontally on a hard flat surface so that the base
of the product is held above the mounting surface
on the four plastic feet.
Do not place the AmiNET500 where it may be
subject to physical shock or vibration or where the
product may drop, topple, slide or shake as this
may cause personal injury or irreparable damage to
the product, which will not be covered by the
manufacturers warranty.
It is very important that the AmiNET500 is not
moved or shaken during operation otherwise loss
of recorded content or permanent damage to the
product may occur.
Do not place the AmiNET500 on any surface that
may be damaged by contact with the plastic feet of
the product.
Openings in the base and rear panel of the
AmiNET500 are required for ventilation. Do not
block or obstruct the airflow through these
openings.
Do not insert any object into the ventilation
openings of the AmiNET500.
Do not operate the AmiNET500 on a soft surface
such as carpet, rug, bed etc as these surfaces will
obstruct airflow, may cause the product to overheat
and will invalidate the warranty.
Do not install the AmiNET500 into any built-in
installation such as bookcase or rack without
ensuring that a minimum of 4” of clear space is
available at the front, rear, sides and top of the
product.
Do not install the AmiNET500 where it may be
exposed to direct sunlight or radiant, convected or
conducted heat from an open fire or radiator.
AmiNET500 User Guide 22/3/05 9:55 am Page ii