background image

4

1

3

5
6

READ 

ME FIRST

1.  Power/Activity LED and IR receiver.

Warning! Before connecting or disconnecting any cable, switch 
off all system devices (TV, A/V Amplifier, etc.) and disconnect 
from the main electrical supply.

Connect cable to STB + TV

The Amigo 7X provides options for connecting audio and video 
to your TV:

HDMI (recommended): Best quality. Connect an HDMI cable  
to the HDMI output of the Amigo 7X and to the HDMI input of 
your TV.

Analogue A/V: Good quality. SD only composite with analogue 
audio left/right. 

Connecting via Wi-Fi

Internal dual band Wi-Fi is a feature for the Amigo 7X. Please 
contact your service provider for detailed instructions about the 
wireless network configuration.

1.  DC power input 5V 2A.
2.  HDMI port.  
3.  Analogue A/V output (adapter cable available). 
4. Ethernet port. 
5.   2X USB port. DO NOT use this port for Powered USB.  

Use for external storage media such USB flash drive (external 
storage media must be formatted as FAT32). You can also 
update software and program lists using this connection.

6. MicroSD Slot (IP only).

Contents 

The Amigo 7X is supplied with the correct power adapter for your 
local system. The package may also contain optional accessories 
shown below, depending on your service provider.

The Amigo 7X is protected with a clear plastic film. This should be 
removed before use.

Overview of the Amigo 7X

1. Connecting the Amigo 7X to a TV

Optional accessories

Amigo 7X

 

User Guide 

Connect an HDMI cable to the HDMI output of the Amigo 7X and 
to the HDMI input of your A/V receiver or home cinema system.

Warning! The Amigo 7X must only be used with the supplied 
power adapter.

Connect the power adapter to the power input of the Amigo 7X, 
then connect the power adapter to the mains supply. The power 
adapter provided will be specific to your region. Ensure you have 
the correct power adapter for your region. If you are unsure, 
contact your service provider.

3. Connecting the Amigo 7X to the power supply

2. Connecting the Amigo 7X to an A/V receiver

Remote control 

and batteries

HDMI cable

3.5 mm jack to  

3 x RCA  cable

Ethernet cable

Отзывы: