Cavity installation with backbox continued...
05 Connect the speaker
Follow step 05 on page 07
Secure the speaker
Position the cable away from the rear of
the loudspeaker. With the speaker resting
on the backbox mounting lip, use screws
provided to secure the speaker onto the
backbox by self-tapping into the mounting
lip, through the pilot holes provided at
each corner.
Ensure the speaker face is flush with
the front of the plasterboard and that
everything is firmly held in position. Shims
may be necessary. (See section B)
Amina backboxes (Backbox CV and
Firehood) are designed for 12.5mm (1/2”)
plasterboard.
Shims can be supplied to adapt the
backbox for different plasterboard
thicknesses.
Contact your supplier when ordering.
Continue on to Section C
(page 18 - testing)
Reference pages for correct
retrofit
alignment and plastering method:
13, 14 + 15
Reference pages for correct
drywall
alignment and plastering method:
16 + 17
Side View
12.5mm
05
screw through
here
09
Ensure cable
is not resting
on back of
speaker
A2
