61
Operating the Units|Setup Menu Options
Doc P/N: 9040962 | Rev 06 | Printed 17 August 2017
Navigation pane
Switching to Indoor Mode
Flicker filtering is performed automatically in the
.
To filter out flickering caused by fluorescent light (for the
select:
1.
>
>
Camera Settings
> Flicker Filter
.
2. Select one of the following modes according to the local electricity
frequency:
•
Off
•
50Hz
•
60Hz
Switching to Night Mode
To improve the video image in sites with poor light conditions,
select:
1.
>
>
Camera Settings
> Night Mode
.
2. Select one of the following options:
•
Off
•
Medium
•
High
Tip:
Select Back to return to the
CONNEX ProSight Installation and Operation Guide
