Quick Setup
Side-to-Side Monitor (SSM) Arm
Installation and Adjustment Instructions
Installation Tools & Reference
Medical Facility Responsibility
2. Installation to Monitor
It is the responsibility of the end user to ensure all aspects of the installation are covered by following the full manual at:
http://www.amico.com/pdf/accessories/SSM_Manual_Web.pdf
1. Installation to Structure
Toll Free Tel: 1.877.264.2697 l Tel: 905.763.7778
Fax: 905.763.8587
Amico Accessories |
www.amico.com
85 Fulton Way, Richmond Hill
Ontario, L4B 2N4, Canada
Hex keys (1/8”, 3/16”, M3, M4) - 1
Philips screw driver
Socket wrenches (12mm, 1/2”) - 1
Adjustable wrench
Insert screws through M4 holes
into back of monitor (4x)
MRS Rail
*
LCD mount shown, for other monitor styles, refer to manual.
*
SSM MONITOR ARM
1. Monitor Mounting Adapter
(Pg.12-18)
VESA LCD mount shown, other options available
2. Monitor Head - Rotation (Pg. 22)
Monitor Rotation Adjustment
3. SSM Joint (Pg. 20)
Rotates the Monitor Head to the desired
position
4. Mounting Adapter (Pg. 6-9)
MON adapter shown for MRS rail
5. MRS Adapter (Pg. 9)
Adapter for the MRS Rail
6. Cable Management (Pg. 25)
Manages the cables of the Monitor for better
organization.
1
2
3
4
5
6
5
6
*
Not provided by Amico
*
*WARNING:
Support SSM arm until the set screws are tightened, SSM arm can slide down when
set screws are not tightened.
2 x 1/4-20 Set screws
Use 1/8” (3mm) hex key
to tighten
*WARNING:
Never attempt to mount or remove the arm from the rail when a monitor is installed.
1 Monitor Mounting Adapter
VESA LCD mount shown, other options available
2 Monitor Head - Rotation
Monitor Rotation Adjustment
3 SSM Joint
Rotates the Monitor Head to the desired position
4 Mounting Adapter
MON adapter shown for MRS rail
5 Cable Management
Manages the cables of the Monitor for better organization
6 Monitor Head - Tilt
Tilt Adjustment Handle
