1
Roll Stand
Quick Installation and Maintenance Instructions
RS_-42_-PKG/RS_-LCD-PKG
Installing Casters & Post into Base
!
WARNING:
Do not use a hammer on the
CASTERS
or
ROLL STAND
base when installing
CASTERS
. Doing so will damage the
CASTERS
.
1. Push each of the 5x
CASTERS
into a leg by hand until it clicks in place, as shown in
Figure 1
.
2. Insert the
POST
into the
BASE ADAPTER
. Using a 1/2" socket wrench, secure by inserting the
SCREW
through the
LARGER WASHER
,
SMALLER WASHER,
the
STAND
BASE
underside, and
BASE ADAPTER
into the
POST
, as seen in
Figure 2
.
Locking & Unlocking Casters
1. To lock the
CASTERS
, step on the
LOCKING LEVER
such that it clicks in the down position.
2. To unlock the
CASTERS
, lift the
LOCKING LEVER
up as seen in
Figure 3
.
Medical Facility Responsibility
Preventive maintenance checks must be performed regularly to maintain the quality and
performance of this product. Any parts that may be broken, missing, worn, distorted or
contaminated in any way should not be used and all affected parts should be replaced
immediately. Should the necessity of any repair be suspected; please contact your local Amico
distributor.
!
WARNING:
It is the responsibility of the end user to ensure all aspects of the installation
are covered by following the full manual found at:
https://www.amico.com/sites/default/files/product/downloads/amico-aa-rst-
roll-stand-manual.pdf
Installation Tools
WARNING:
If the product was purchased with counterweight, perform Installing Counterweight step 1 and/or step 2 from the full
manual. If not, proceed to the Installing Casters & Post into Base section.
3/16" Hex Key
1/2" (12.7 mm) Socket Wrench
#2, #3 Phillips Head Screwdrivers
PATIENT MONITOR
SHELF
TILT ADJUSTMENT
HANDLE
CORD WRAP
3" (7.6 cm)
LOCKING CASTERS
BASKET
ALUMINUM CONSTRUCTION
STAND POST
[X-RS-POST]
BASE ADAPTER
[RS-ADA-125]
STAND BASE
[X-RS-BASE]
POST HW-KIT SMALL WASHER
[H-STW-516-SMOD]
POST HW-KIT LOCK WASHER
[H-RS-LOCK-WASH]
POST HW-KIT LARGE BOLT
[H-HSCS-51618-312]
FIGURE 1
CASTERS
[X-RS-CSTR-3B]
5X
STAND BASE
[X-RS-BASE]
PROJECT #: 0378
FOR USE WITH: RS(5/6/7)-((42(0/2/3/4/6/7/8/9/W))/LCD)(-PKG)
WARNING: DO NOT USE A HAMMER ON THE CASTERS OR ROLL STAND BASE WHEN INSTALLING CASTERS. DOING SO WILL DAMAGE THE CASTERS
PUSH 5X
CASTERS
INTO
STAND BASE
BY HAND UNTIL IT CLICKS IN PLACE, AS SHOWN IN FIGURE 1.
1.
INSERT
STAND POST
INTO
BASE ADAPTER
. USING 1/2" SOCKET WRENCH, SECURE BY INSERTING
POST HW-KIT-LARGE BOLT
THROUGH
POST
2.
HW-KIT LOCK WASHER
,
POST HW-KIT SMALL WASHER
,
STAND BASE
,
BASE ADAPTER
, AND INTO
STAND POST
, AS SEEN IN FIGURE 2.
CUSTOMER
FIGURE 2
5
4
3 2
1
DESCRIPTION:
PART NO:
SCALE:
DRAWN BY:
CHECKED BY:
SHT.
OF
DRAWING NO:
NTS
2
6
PRIVATE AND CONFIDENTIAL
THIS PRINT IS PROPERTY OF AMICO ACCESSORIES
AND IS LOANED IN CONFIDENCE SUBJECT TO RETURN
UPON REQUEST AND WITH THE UNDERSTANDING THAT
NO COPIES ARE TO BE MADE WITHOUT THE CONSENT
OF AMICO ACCESSORIES
ALL RIGHTS TO DESIGN OR INVENTION ARE RESERVED
DATE:
DATE:
Assembly instructions for Roll Stand
EC
2014-02-28
JT
2014-08-04
85 Fulton Way
Richmond Hill, Ontario
L4B 2N4, Canada
Toll Free: 1.877.264.2697 (T)
Tel: (905) 763.7778
Fax: (905) 763.8587
RS_-___-___
20140228-E2799
PROJECTION
STAND BASE
[X-RS-BASE]
5x
CASTERS
[X-RS-CSTR-3B]
STAND POST
[X-RS-POST]
BASE ADAPTER
[RS-ADA-125]
STAND BASE
[X-RS-BASE]
POST HW-KIT SMALL WASHER
[H-STW-516-SMOD]
POST HW-KIT LOCK WASHER
[H-RS-LOCK-WASH]
POST HW-KIT LARGE BOLT
[H-HSCS-51618-312]
FIGURE 1
CASTERS
[X-RS-CSTR-3B]
5X
STAND BASE
[X-RS-BASE]
PROJECT #: 0378
FOR USE WITH: RS(5/6/7)-((42(0/2/3/4/6/7/8/9/W))/LCD)(-PKG)
WARNING: DO NOT USE A HAMMER ON THE CASTERS OR ROLL STAND BASE WHEN INSTALLING CASTERS. DOING SO WILL DAMAGE THE CASTERS
PUSH 5X
CASTERS
INTO
STAND BASE
BY HAND UNTIL IT CLICKS IN PLACE, AS SHOWN IN FIGURE 1.
1.
INSERT
STAND POST
INTO
BASE ADAPTER
. USING 1/2" SOCKET WRENCH, SECURE BY INSERTING
POST HW-KIT-LARGE BOLT
THROUGH
POST
2.
HW-KIT LOCK WASHER
,
POST HW-KIT SMALL WASHER
,
STAND BASE
,
BASE ADAPTER
, AND INTO
STAND POST
, AS SEEN IN FIGURE 2.
CUSTOMER
FIGURE 2
5
4
3 2
1
DESCRIPTION:
PART NO:
SCALE:
DRAWN BY:
CHECKED BY:
SHT.
OF
DRAWING NO:
NTS
2
6
PRIVATE AND CONFIDENTIAL
THIS PRINT IS PROPERTY OF AMICO ACCESSORIES
AND IS LOANED IN CONFIDENCE SUBJECT TO RETURN
UPON REQUEST AND WITH THE UNDERSTANDING THAT
NO COPIES ARE TO BE MADE WITHOUT THE CONSENT
OF AMICO ACCESSORIES
ALL RIGHTS TO DESIGN OR INVENTION ARE RESERVED
DATE:
DATE:
Assembly instructions for Roll Stand
EC
2014-02-28
JT
2014-08-04
85 Fulton Way
Richmond Hill, Ontario
L4B 2N4, Canada
Toll Free: 1.877.264.2697 (T)
Tel: (905) 763.7778
Fax: (905) 763.8587
RS_-___-___
20140228-E2799
PROJECTION
STAND POST
[X-RS-POST]
BASE ADAPTER
[RS-ADA-125]
POST HW-KIT SMALL WASHER
[H-STW-516-SMOD]
POST HW-KIT LARGE BOLT
[H-HSCS-51618-312]
POST HW-KIT LOCK WASHER
[H-RS-LOCK-WASH]
STAND BASE
[X-RS-BASE]
Figure 1
Figure 2
LOCK
UNLOCK
LOCKING
LEVER
PROJECT #: 0378
FOR USE WITH: RS(5/6/7)-((42(0/2/3/4/6/7/8/9/W))/LCD)(-PKG)
TO LOCK THE
CASTERS
, STEP ON THE LOCKING LEVER SUCH THAT IT CLICKS IN THE DOWN POSITION.
1.
TO UNLOCK THE
CASTERS
, LIFT THE LOCKING LEVER UP
2.
CUSTOMER
FIGURE 1
5
4
3 2
1
DESCRIPTION:
PART NO:
SCALE:
DRAWN BY:
CHECKED BY:
SHT.
OF
DRAWING NO:
NTS
6
6
PRIVATE AND CONFIDENTIAL
THIS PRINT IS PROPERTY OF AMICO ACCESSORIES
AND IS LOANED IN CONFIDENCE SUBJECT TO RETURN
UPON REQUEST AND WITH THE UNDERSTANDING THAT
NO COPIES ARE TO BE MADE WITHOUT THE CONSENT
OF AMICO ACCESSORIES
ALL RIGHTS TO DESIGN OR INVENTION ARE RESERVED
DATE:
DATE:
Assembly instructions for Roll Stand
EC
2014-02-28
JT
2014-08-04
85 Fulton Way
Richmond Hill, Ontario
L4B 2N4, Canada
Toll Free: 1.877.264.2697 (T)
Tel: (905) 763.7778
Fax: (905) 763.8587
RS_-___-___
20140228-E2799
PROJECTION
LOCK
UNLOCK
LOCKING
LEVER
Figure 3
