Amica 1143.4TfYDbOQVJXSp, Инструкция по эксплуатации

Страница: 19 / 40

19
OPERATION
Menu \ Setup \ Brightness
Select Brightness menu and touch , The
following screen will be displayed:
Touch navigation sensor fields to adjust
display brightness within 0-100% range in 1%
steps. Touch to store the selected display
brightness level. The selection is stored by
the appliance and upper level menu is auto-
matically displayed.
Menu \ Setup \ Service
Select Service menu and touch , The fol-
lowing screen will be displayed:
If the appliance detects an error, its code will
be displayed as shown above.
If E1 error is detected by the appliance, meat
temperature probe can’t be used. If an at-
tempt is made to select a programme where
the meat probe is used, the appliance will
display service screen showing E1 error and
its brief description. You can continue to use
the appliance on the programs do not require
meat probe. Touch to acknowledge service
screen and go to main menu.
If no sensor field is touched within 10 seconds
when E1 error service screen is displayed, the
appliance will automatically go into standby.
Menu \ Setup \ factory Settings
Select Factory Settings menu and touch ,
The following screen will be displayed:
Touch navigation sensor fields to select
whether to restore the factory settings or
leave the current settings. To keep current
settings, select “No” and confirm by touching
sensor field. The appliance goes to upper
menu level.
To restore factory settings select “Yes” and
confirm by touching sensor field. The fac -
tory settings will be restored.