manualshive.com logo in svg

AMI CPC-2245 Series, Руководство пользователя

Поделиться
Скачать
AMI CPC-2245 Series Скачать руководство пользователя страница 59

50

CPC-2245  User's Manual

4.1

Ethernet software configuration

The CPC-2245 on-board Ethernet interface supports all major
network operating systems. To configure the medium type, to view
the current configuration, or to run diagnostics, do the following:

1. Power the CPC-2245 on. Ensure that the RSET8139.EXE file

is located in the working drive.

2. At the prompt type RSET8139.EXE and press <Enter>. The

Ethernet configuration program will then be displayed.

3. This simple screen shows all the available options for the

Ethernet interface. Just highlight the option you wish to change
by using the Up and Down keys. To change a selected item,
press <Enter>, and a screen will appear with the available
options. Highlight your option and press <Enter>. Each
highlighted option has a helpful message guide displayed at the
bottom of the screen for additional information.

4. After you have made your selections and are sure this is the

configuration you want, press ESC. A prompt will appear
asking if you want to save the configuration. Press Y if you
want to save.

The Ethernet Setup Menu also offers three very useful diagnostic
functions. These are:

1. Run EEPROM test

2. Run Diagnostics on Board

3. Run Diagnostics on Network

Each option has its own display screen that shows the format and
result of any diagnostic tests undertaken.

Содержание CPC-2245 Series
















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды