AMG210M
AMG210M PoE Series
Mini Media Converter
Installation Manual - Hardware
PACKING LIST
The following items should be included in the box:
•
Mini PoE Media Converter
•
52V
DC
Power Supply
(with region specific plug)
•
Installation & DIP Switch Manual
•
SFP Module*
(*only included with some models)
If any of the above items are missing or damaged
please contact your supplier or distributor.
POWER
The mini PoE media converter is powered
by a 48-56V
DC
power supply. A DC type
power supply is included with each unit.
The centre pin is positive while the outer sleeve is
negative. The connector type is a 2.1MM input jack.
The power consumption of the AMG210M
mini PoE media converters are detailed below:
•
1Gb Models
(No PoE Load)
<3W
*
•
1Gb Models
(Max PoE Load)
<33W
*
*Excludes SFP Module
The unit supports IEEE 802.3af/at PoE up to 30W
D39247-00
LED INDICATORS
The mini media converters feature LED indicators
to aid in system operation and fault diagnosis. The
meaning of each LED is described in the table below:
POE
On: PoE power is being supplied
Off: No PoE power is being
supplied
TP
L/A
Solid: RJ45 is connected but no
data is being received
Flashing: RJ45 is connected and
data is being received
PWR
On: Unit is powered up
Off: Unit is not powered up
SPD
On: RJ45 is connected at the
highest possible speed
Off: RJ45 is not connected or is
connected at a speed slower than
the highest possible
FX
L/A
Solid: SFP is connected but no data
is being received
Flashing: SFP is connected and
data is being received
DUP
On: RJ45 is in full duplex mode
Off: RJ45 is in half duplex mode
