Seite 9 von 17
AMG Sicherheitstechnik GmbH
Industriepark Straße A-9
39245 Gommern
Telefon 039200-7797-0
Freecall 0800-2264264*
Fax 039200-7797-29
Geschäftszeiten sind von 8-17 Uhr, außerhalb dieser Zeit ist ein Anrufbeantworter geschaltet
*) kostenlos aus dem deutschen Festnetz und allen deutschen Mobilfunknetzen
Switching the GPS emergency call transmitter on and off
We recommend to charge the device for at least 1 hour before the configuration.
To turn on the GPS emergency transmitter, press the on / off switch for about 1 second
until the LEDs light up. When charging via USB or charging station, the device
automatically turns on. (The device takes about 30 seconds to boot up.)
To turn it off, press the on / off switch and the SOS button together for about 1 second
until the LEDs stop lighting and an alert tone sounds.
Description of the LED function
LED
Blue is constantly lit
Blue is flashing fast
Blue is off, or blinking
slowly
meaning
The battery is
charging
Battery capacity is less than 20%
The battery is fully
charged or will not
charge
LED
Blue flashes briefly
every 3 seconds
Blue flashes for a long time every
3 seconds (1 second on, 3 seconds
off)
Blue is out
meaning
The device has
detected a GPS
position
The device has not yet determined
a GPS position
The GPS module is in
sleep mode
LED
Green flashes
briefly every 3
seconds
Green flashes
twice every 3
seconds
Green flashes every 3
seconds for a long time (1
second on, 3 seconds off)
Green is
constantly lit.
meaning
The device is
connected to the
GSM network
Device is
connected to the
GPRS network
The connection to the GSM
network is established
SIM card was
not recognized
App AMG MessageDirect for programming the NR-03
All SMS commands can also be sent via this app, as this app facilitates the programming
of the NR-03, since the commands do not have to be written manually in the SMS /
Messaging app of the smartphone.
Please select in the app NR-02 / -03, save the number of the Sim card, which is in the
NR-03 and then you can select from the list the SMS commands.
For normal operation, you only need to save the phone number (s) to be called
/ notified by SMS in the event of an alarm and the time zone (see below).
Please only perform the programming with the menu "NR-02/03", any other
menu can lead to a faulty setting of the device and cause high costs for your
SIM card.
Note for the formatting of any command SMS
No spaces may be used. Before sending a command text message, please check that
there is no space by using the smartphone function: "auto-complete" or "auto-
correction".
