AMF-BRUNS Alu Ramp, Руководство по эксплуатации

Страница: 31 / 56

Operation
Alu Ramp Page 31 of 56
WARNING!
Risk of injury if the electrically operated belts loosen when
driving.
If the electrically operated belts are unevenly tensioned,
they can become loose when driving. There is a risk of the
passenger in the wheelchair and of the other occupants in
the vehicle being injured.
Therefore:
Push the wheelchair into the centre of the vehicle.
Make sure that the electrically operated belts leave the
belt reels at the same angle as one another.
If this is not the case, re-position the wheelchair.
Ö
Attach the retractor belts to the wheelchair.
Ö
Clip the retractor belts onto the fittings in the rear area of
the floor of the vehicle (see Figure 4, page 18).
Ö
Tension the retractor belts by tightening the belt reels
(see Figure 16).
Figure 16: Tensioning the Retractor Belts
Ö
Apply the wheelchair's parking brakes.
Ö
Secure the passenger in the wheelchair with the lap belt
and the automatic diagonal shoulder belt (optional, refer
to the Brief Operating Instructions for the wheelchair and
occupant restraint system).
Retractor
belt