Ametek Sorensen SG Series, Руководство по программированию, Страница: 62 / 149

Ethernet Configuration and Remote Programming SG Series Programming
5-28
M550129-03 Rev L
5.5.6
PRESETS
The Presets page (only in SGI) displays stored values, which can be edited,
saved and/or recalled. The parameters for this page are:
Figure 5-18. SGI Presets Page (not in SGA/SGe)
Index : Displays memory locations named POWER ON (default power on
settings) and 1 through 9
Volts : value presently stored in memory location name
Current : value presently stored in memory location name
Over Volt : value presently stored in memory location name
Output State : displays state of the output condition presently stored in
memory location name (indicator is an open circle for OFF or a solid circle
for ON)
SAVE : saves the input values into their respective location name memory
(Must have Read/Write access)
EXECUTE : recalls the following settings into operation from its respective
memory location name (Must have Read/Write access)
If you have Read/Write access, you can save the following settings into
its respective memory location name (after inputting desired settings, click
SAVE ):

Volts : click in the Volts field and input a new value for voltage.

Current : click in the Current field and input a new value for
current.