Ametek Sorensen SG Series, Руководство по программированию

Страница: 30 / 149

Ethernet Features, Functions and Specifications SG Series Programming
4-2
M550129-03 Rev L
I
NTERNET OR
LAN C
ONNECTION
To operate your Sorensen Ethernet product connected to the Internet or a
LAN you will need:

Pentium-based laptop or desktop computer running Microsoft Windows
XP (or better)

Ethernet based Network Interface Card (NIC) or built-in port capable of
10/100 MBit operation

Appropriate Ethernet modem for Internet connection, or

Switch or hub (Linksys brand strongly recommended) for LAN
connection

Standard CAT 5 Ethernet interconnect cable

Microsoft Internet Explorer version 6.0 or later

Sun Microsystems Java Runtime Environment
4.2
FEATURES AND FUNCTIONS
4.2.1
Features

Ethernet/LAN connectivity, 10/100base-T compatible

Fully
™ (LAN eXtensions for Instrumentation) class C compliant

Built-in Web Server for direct control using Internet Explorer 6.0 or
higher

16-bit programming and 16-bit readback of voltage and current

Programmable overvoltage protection with reset

SCPI compliant command set

User-programmable signals including Local/Remote Sense relay drive,
External Polarity relay drive, and Disconnect (Isolate) Relay Drive

User selectable Constant-Voltage/Constant-Current or Foldback mode,
with reset

Voltage Ramp and Current Ramp functions

Field-upgradeable firmware via RS232

Full calibration through software control

Rear panel Ethernet/IEEE-802.3 and RS232 control interface

Rear panel External User Control Signal Interface
(Includes optically isolated external hardware trigger input)

Rear panel configuration switch
4.2.2
Programmable Functions

Output voltage and current