Ametek ORTEC radEAGLET, Руководство пользователя

Страница: 58 / 140

5.9 Bluetooth Settings radEAGLET User Manual
Hotspot Status
Figure 49: Hotspot access credentials
Exit
Return to the superior screen.
5.9 Bluetooth Settings
This item is available while a Bluetooth dongle is plugged into the radEAGLET ’s USB-A
port.
This screen groups settings and status information to pair your radEAGLET with a Bluetooth
equipped device like a smart phone to access the radEAGLET ’s Web interface or to share
the Internet connection.
You can switch Bluetooth on or off (Fig. 50 , p. 59 ) and start pairing with an external device.
Initially the radEAGLET knows no Bluetooth devices (Fig. 51 , p. 59 ).
Follow the instructions displayed to initiate the pairing. The paired device will be shown
(Fig.
52 , p. 60 ) and is ready for connection.
The radEAGLET remembers all devices it has been paired to. If your desired device is
already known, just choose it from the list.
After the connection is established, the IP address to access the Web interface is shown
(Fig.
53 , p. 60 ) as text and as QR code for devices equipped appropriately.
Settings and Commands
Connect, Disconnect
Start or stop the connection between the radEAGLET and the Bluetooth device.
58/140 Software 3.2.0 • Document 3.2.2o © innoRIID GmbH • 2018-10-24