AMETEK CTS
NSG 4070
Quick Start and Safety Guide
9 / 20
2
Unpacking, storage and transport
2.1
General
Save all packing materials! They will be needed in order to safely package the equipment for calibration service
or repair.
Packaging materials
•
Carton:
Cardboard
•
Padding:
CFC-free polystyrene foam
•
Plastic bags:
Polyethylene
Avoid the risk of condensation!
If a large temperature difference has occurred, allow time for the temperature to stabilize. This may take several
hours.
2.2
Storage and transport
Do not stack, either packaged or unpacked.
Do not stand on end; arrows on the packaging must always point upwards.
Protect from dampness, heat, cold and rain.
Do not throw.
Do not sit or stand on the instrument and packaging.
2.3
Unpacking
•
Is the packaging damaged?
If YES
transportation company
•
Are all the packages present and correct?
If NO
transportation company
•
Open the packaging, remove the accessories.
•
Grip the instrument at the sides and lift it from the packaging.
•
Are the instrument or accessories damaged?
If YES
transportation company
•
Are the contents of the package complete?
If NO
Teseq sales office
•
Keep the instruction manual with the instrument.
•
Keep the packaging.
2.4
Scope of delivery
•
NSG 4070 mainframe
•
Operating manual
•
Spare fuses (2)
•
RS232 cable (Nullmodem)
•
Mains cable GB
•
Mains cable CH
•
Mains cable USA / JP
•
Mains cable EU
•
LAN cable, crossover, 3 m
•
Keyboard (English)
•
USO 4013 (USB to
serial / optical converter with 20 m optical cable)
