Ametek Mocon Dansensor LeakPointer 3, Руководство пользователя

Страница: 67 / 100

Dansensor
®
LeakPointer 3/3 + EN User Guide 65
P/N 380064-F
06/2021
Access
From the Access menu the various users and their access levels are created and managed.

This is also where the Administrator can log in and also change the login PIN-code.
See "Access levels" on page 66 for details about the various access levels and the associated
rights.
Administrator Login Requires for a special Administrator PIN-code (6 digits).
From the factory the PIN-code is set to “000000” .

The Administrator PIN-code can be changed to one of your
own selection - see "Change Administrator PIN-code" on page
69 for details.
For best safety and correct operation of the device,
we recommend logging out of the “Administrator”
feature when its use is not required.
User Login (Only available if login is required - see "Login" on page 84 for
details).
Select User or login with User ID , whatever is required.
Log out (Only available if login is required)
Log out the current user, then login as a different user by
selecting
User or login with User ID , whatever is required.
User Administration Maintain user database.

See "User Administration" on page 67 for details.
Change Administrator
PIN-code See "Change Administrator PIN-code" on page 69 for details.