Ametek EC1000S, Руководство пользователя

Страница: 179 / 291

User Manual EC1000S
California Instruments 175
5.5.2 Memory (MEMORY)
The “MEMORY” screen is used to control memory.
Settings saved (stored) to store/recall memory No. 1 to No. 30 can be recalled and used.
Recall of store/recall memory contents can be executed only when output is off.
S
ee “4.8 Using Memory Functions”
, for description of store/recall memory.
After selecting one of the following operations, use the selection box to specify the target memory number.

STORE...: Stores settings to specified memory number.

RECALL...: Recalls settings from specified memory number.

CLEAR...: Clears settings in specified memory number.
5.5.3 Remote (REMOTE)
The remote control connected via a USB interface can be used to switch to local mode for operation via the
panel screen.
When in remote control mode, t
he “RMT” icon is displayed.
See “6 USB INTERFACE”.

Operation steps
1.
Select
“LOCAL…”, then press the
E NT E R
key.

The EXEC box is displayed.
ENTER CANCEL
EXEC box
Displayed during
remote mode
2.
Make sure
“EXEC” has been selected, then press the
E NT E R
key.

This sets local mode.