Ametek AMEVision Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 85

Ametek AMEVision Скачать руководство пользователя страница 6

PN 9000-165-VE, Rev P

Safety Notes

WARNINGS, CAUTIONS,

and

NOTES

contained in this manual emphasize critical

instructions as follows:

An operating procedure which, if not strictly observed, may result in personal
injury or environmental contamination.

An operating procedure which, if not strictly observed, may result in damage to
the equipment.

Important information that should not be overlooked.

Burn hazard. Hot surface. Do not touch, allow to cool before servicing.

Electrical Safety

Up to 5 kV may be present in the housing. Always shut down power source(s) before
performing maintenance or troubleshooting. Only a qualified electrician should make
electrical connections and ground checks.

Any use of the equipment in a manner not specified by the manufacturer may impair
the safety protection originally provided by the equipment.

Grounding

Instrument grounding is mandatory. Performance specifications and safety protection
are void if instrument is operated from an improperly grounded power source.

Verify ground continuity of all equipment before applying power.

vi | Thermox

®

AMEVision Display User Interface

«
...
4
5
6
7
8
...
»

Содержание AMEVision






















































































Отзывы:

Нет отзывов