Ametek 3050-DO, Руководство пользователя

Страница: 28 / 46

Firmware Upgrade
Firmware upgrades are carried out using a USB flash drive. It is
necessary to plug the USB into the inside of the AMEVision enclosure
to download the software.
Figure 22a. Firmware Upgrade screen.
1. Use the left and/or right navigation arrows to locate the Firmware
Upgrade menu and press the ENTER/MENU key .
2. Press the ENTER / MENU key to access the Firmware Upgrade screen.
3. Use the navigation keys to select the option to upgrade and press the
ENTER / MENU key.
4. You will be directed to “Insert the USB drive” containing the option’s
firmware. This requires that you open the AMEVision enclosure door
and physically connect the USB drive.
5. Using a standard 7/16” wrench loosen and remove the nut of the left
side of the AMEVision enclosure and open the AMEVision enclosure
door.
6. Locate the plug-in port for the USB flash drive and plug the drive with
the upgrade software into the port in the AMEVision enclosure. Press
the
ENTER / MENU key to continue or the CANCEL key to exit.
28 | Model 3050 Moisture Analyzers Series