Ametek 0 LAND LSP HD 61, Руководство пользователя

Страница: 14 / 42

Page 8
User Guide LSP
HD
Linescanner Head
2 Installation
2.1 Introduction
The equipment specified in this User Guide must be operated, maintained and serviced
by suitably trained personnel, capable of carefully following the procedures, warnings
and guidelines given. It is advisable that all User Guides and Installation Guides
associated with LSP
HD
System equipment should be read thoroughly and be kept readily
available.
CAUTION
Ensure that the LSP
HD
Head is mounted securely, in a location where the effects
of vibration, dust and fumes are kept to a minimum. Ensure that the scanning
sight path is not obscured.
The LSP
HD
10, 20 & 21 have a focus distance factory set at 2000 mm / 79 in.
Refer to Section 2.2 for details of how to change the focus distance.
Choose a mounting location which minimises external heating of the scanner.
If the ambient temperature of the unit exceeds the specified maximum, a
cooling system (available from AMETEK Land) must be fitted.
If the instrument is to be used in environments where gases resulting from
combustion are present, contact AMETEK Land so that the application can be
fully assessed before you install the scanner.
Fig. 2 Focus adjustment for the LSP
HD
1, LSP
HD
11, LSP
HD
20, LSP
HD
21 and LSP
HD
22
Focusing ring
Clamping plate