Ametek Land 4750-PM, Руководство пользователя

Страница: 25 / 64

4 - 1 User Guide
Particulate Measurement System 4750-PM
4
Installation
4.1 Unpacking and Inspection
Carefully unpack the unit and retain the packaging to return equipment
for servicing or repair. If the equipment is damaged in any way, return it
to AMETEK Land or your local AMETEK Land representative in its original
packaging (see contact details on the rear cover of this guide).
No responsibility for damage arising from the use of non-approved packaging
will be accepted.
NOTE
Ensure all items and accessories specified are present. If this is
not the case, please contact AMETEK Land or your local AMETEK
Land representative .
The 4750-PM sensor is supplied as a compact package; if supplied, the purge
air blower is supplied separately.
The sensor may be supplied with the following items and accessories:
4750-PM Description
Standard Sensor (incl. enclosure and body with built-in flange)
Optional Purge Air Flow sensor (fitted)
If supplied, the purge blower is packed separately and may include the
following parts:
Medium Blower Unit Description
Standard 3 m flexible hose (incl. fixings)
Optional Weather cover
4.2 Preparation – Overview of Process
There are four stages to installing and commissioning a 4750-PM system:
1) Pre-installation preparations – before the instrument/system arrives on
site
2) Installation – when the instrument/system has arrived on site
3) Commissioning
4) Calibration
4.2.1 Pre-Installation Preparations
• Selecting the monitoring point and orientation of the sensor.
• Carrying out the required welding, access, power, cabling, and air purge
preparations.