AmeriGlide PRO DUMBWAITER, Руководство пользователя, Страница: 20 / 26

20
STEP 9: ACCEPTANCE TESTS

Consult local authority for appicables codes and regulation such as, and
not limited to :

National electrical code

National building code

Federal codes

Elevator code

Municipal law and work construction permit

Work permit for elevator contractor

Local Fire Department

Consider hiring Architects, engineer, electrician and elevator
mechanic to ensure a fully compliant installation.

Ajust the landing switches for the cab to align at less than 1/2’’ from the
landing level

Confirm the the interlock are working properly

Dumbwaiter will not work with any door opened

Dumbwaiter wil not work with any door unlocked and closed

Interlock must keep door locked untill cab is at the adjacent
landing. ( 4’’ door zone )

Confirm the Estop is functionnal

Confirm the final limit switches are working properly ( Top and bottom )

Confirm the car gate switch is functionnal ( if installed )

Confirm the car light are working properly

Confirm the call station are working properly

Perform a load test on the brake :

Loosen the chain of 4 ‘’

Load cab with 125% of the rated load

Lower cab on a piece of wood stud ( Vertically placed in the
pit )

Drive the stud away

Car should drop on brake ( chain still loose )

Drive unit up to release brake, ( install jumper on slack chain
circuit

Remove all jumper

Disconnect one landing kit at the time, unit shall code a fault, reset

Dumbwaiter can now be comisionned to the customer