FREESTANDING
DOUBLE-HEADER PERGOLA
INSTALLATION INSTRUCTIONS
Recommended Tools:
Before You Begin:
Saftey Glasses, Tape Measure, Carpenters Level, Framing Square, Hex Head Nut Drivers, Chalk Line,
Elec. Drill w/ Bits, 5/8" Hole Drill Bit, (Masonry Drill, Bits. & Anchors may be required if securing to
Stone, Concrete, or any other masonry unit.)
1.) Please read all instructions carefully. Check the Bill of Materials for any missing parts, and gather
necessary tools. To prevent scratching of painted materials, place on a tarp, paper, or protective
material.
2.) You may be required to obtain a building permit for this structure from your local building authority.
This product should only be installed in 10, 20, or 30 psf (pounds per square foot) snow load and
90 mph or less wind speed zone (Custom models can be designed for heavier loads). This product
is listed under ICBO Evaluation Report #2621P. You may have to submit two copies of your plot
plan and also a copy of the evaluation report to your local building authority for a building permit.
Contact your local building department for details and your area's snow & wind loads.
3.) Note that this Pergola Kit is not designed to carry additional loads such as hanging heavy plants,
swings, people, or other objects.
4.) Fountain, Patio Stone, & Ferns are not included.
Rev'd - 1/18/10
