HOW TO USE YOUR BREAKFAST STATION (cont.)
COFFEE MAKER
1.
Add desired amount of coffee grounds into Coffee Filter and place Coffee Filter
inside of Filter Basket.
2.
Pour desired amount of clean, cold water into the Water Tank. Never exceed
maximum level indicated.
3.
Make sure that Coffee Carafe is on burner.
4.
Close Water Tank Lid and flip Selector Switch to the COFFEE/3 in 1 position.
5.
While coffee is brewing, DO NOT open Water Tank Lid as this could cause scaling.
6.
When coffee has finished brewing, flip Selector Switch to COFFEE OFF position.
7.
Unplug appliance when finished and allow hot plate beneath Coffee Pot to cool
completely before cleaning.
8.
Coffee maker is equipped with a non-drip valve that will automatically operate to
stop drops of coffee dripping onto the hotplate. However, if any coffee splashes or
drips onto the hot plate beneath the Coffee Pot, clean with a dry, non-abrasive cloth
after appliance has cooled completely.
HELPFUL TIPS
BURNING/SMOKING
If the machine is burning or smoking during cooking, turn all knobs and switches to
the OFF position to end the cooking cycles.
Smoking may also be caused by excess crumbs or grease stuck inside the machine.
To prevent smoking, make sure to empty and clean the Crumb Tray after each use.
NONSTICK SURFACE
It is normal for appliances with nonstick coating to emit a slight odor and smoke
during the first few uses. The odor and smoking should dissipate with normal usage.
Remember to always coat nonstick surface with vegetable oil before each use to
protect the nonstick finish.
CLEANING AND MAINTENANCE
Make sure the unit is unplugged before cleaning. Allow all parts to COOL to the touch,
especially the Toaster Oven, Griddle Plate, Coffee Pot and Crumb Tray.
To prolong the life of your 3-IN-1 DELUXE BREAKFAST STATION, please follow these
simple steps:
Make sure the 3-IN-1 DELUXE BREAKFAST STATION is unplugged and completely
cooled before storing or cleaning.
Remove Griddle Plate, Wire Rack and Crumb Tray. Wash them using warm, soapy
water and a non-abrasive sponge or cloth. Dry thoroughly with a dry, non-abrasive
cloth.
www.maxi-matic.com
7