K22
© 2008 AS America Inc.
TOWNSEND CHAMPION
®
4
ROUND FRONT RIGHT HEIGHT™ TOILET
VITREOUS CHINA
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
IMPORTANT:
Dimensions of fixtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
19mm ± 6mm
(1 ± 1/4)
419mm
(16-1/2)
FINISHED
FLOOR
305mm
(12)
721mm
(28-3/8)
C/L OF OUTLET
8
3
m
m
(3
-1
/4
)
216mm
(8-1/2)
419mm
(16-1/2)
C/L OF SEAT POST HOLES
140mm (5-1/2 CENTERS)
379mm
(14-7/8)
267mm
(10-1/2)
16mm
(5/8)
873mm
(34-3/8)
479mm
(18-7/8)
SUPPLY
AS
REQ'D
284mm
(11-3/16)
152mm
(6)
254mm
(10)
356mm
(14)
FINISHED WALL
FOOT ON
BOTTOM
OF BOWL
To Be Specified:
❏
Color:
❏
White
❏
Bone
❏
Silver
❏
Linen
❏
Black
❏
Seat: (please specify color)
❏
Champion
®
Slow Close Round Front #5330.010
❏
Rise & Shine Round Front #5322.011
❏
Laurel Round Front #5308.014
❏
Supply with stop:
TOWNSEND CHAMPION
®
4 ROUND FRONT
RIGHT HEIGHT™ TOILET
❑
2735.014
• Vitreous china
• EverClean™ anti-microbial surface which
inhibits the growth of stain and odor causing
bacteria, mold, and mildew
• Low-consumption (6.0 Lpf/1.6 gpf)
• Features
Champion®4 Flushing System
performance platform
• 4" non-adjustable, piston action Accelerator™
flush valve
• 16-1/2" rim height for accessible applications
• Round Front siphon action jetted bowl
• 2-3/8" fully-glazed trapway
• Speed Connect™ tank/bowl coupling system
• Chrome-plated trip lever
• Sanitary pier on bowl
• 100% factory flush tested
• 2 bolt caps
• 10 year warranty
❑
3180.016
Round Front Right Height™ Bowl
❑
4281.014
Tank
Nominal Dimensions:
721 x 479 x 873mm
(28-3/8" x 18-7/8" x 34-3/8")
Fixture only, seat and supply by others
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
• Los Angeles Department of Water and Power
Supplementary Purchase Specification for
Non-Adjustability - July, 2003 revision
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
BUILDING FACILITIES-CHECK LOCAL CODES.
Revised 07/07